Step One:

Cut one strip of muslin and one strip of pellon 2″ wide and 22″ long. I can make four napkin rings with this length, if you want to make more make your strip longer. I use pellon “shirttailor” .

Step Two:

This shows the two fused together.

Step Three:

Press 1/4 inch hem down both sides of your strip.

Step Four:

Get creative pick a stitch that will work as an edge stitch. I used #15 on an Elna 7000

Step Five:

Edge stitch down both sides.

Step Six:

Shows the strip with both edges complete.

Step Seven:

Pick a stitch to do down the center of your strip. I picked #21 on my Elna 7000.

Step Eight:

This is how your strip will look with embroidery finished.

Step Nine:

Cut the strip in 4 1/2″ pieces.

Step Ten:

Fold with right sides together using a 1/4″ seam.

Step Eleven:

This is your finished piece, turn it right side out and you are done.

Step Twelve:

Here is your finished napkin ring.